 |
| Quantity: | |
|---|---|
| Stainless Steel Pipe Tube Return U bend
The seamless welding technology ensures a smooth finish, enhancing the overall stability of the pipes. The large moment of inertia and cross-section modulus provide these bends with superior bending and torsion resistance, making them ideal for critical applications where structural integrity is paramount.
| Size
| ASME/ANSI B16.9、B16.28 | ||||||||
| Norminal Pipe Size | Outside Diameter at Bevel | Center to End | Center to Center | Back to Face | ||||
| 45°Elbows | 90° EIbows | 180° Reture | ||||||
| H | F | P | K | |||||
| Long Radius | Long Radius | Short Radius | Long Radius | Short Radius | Long Radius | Short Radius | ||
| 1/2 | 21.3 | 15.7 | 38.1 | -- | 76.2 | -- | 47.8 | -- |
| 3/4 | 26.7 | 19.1 | 38.1 | -- | 76.2 | -- | 50.8 | -- |
| 1 | 33.4 | 22.4 | 38.1 | 25.4 | 76.2 | 50.8 | 55.6 | 41.1 |
| 11/4 | 42.2 | 25.4 | 47.8 | 31.8 | 95.3 | 63.6 | 69.9 | 52.3 |
| 11/2 | 48.3 | 28.4 | 57.2 | 38.1 | 114.3 | 76.2 | 82.6 | 62.0 |
| 2 | 60.3 | 35.1 | 76.2 | 50.8 | 152.4 | 101.6 | 106.4 | 81.0 |
| 21/2 | 73.0 | 44.5 | 95.3 | 63.5 | 190.5 | 127.0 | 131.8 | 100.1 |
| 3 | 88.9 | 50.8 | 114.3 | 76.2 | 228.6 | 152.4 | 158.8 | 120.7 |
| 31/2 | 101.6 | 57.2 | 133.4 | 88.9 | 266.7 | 177.8 | 184.2 | 139.7 |
| 4 | 114.3 | 63.5 | 152.4 | 101.6 | 304.8 | 203.2 | 209.6 | 158.8 |
| 5 | 141.3 | 79.2 | 190.5 | 127.0 | 381.0 | 254.0 | 261.9 | 196.9 |
| 6 | 168.3 | 95.3 | 228.6 | 152.4 | 457.2 | 304.8 | 312.7 | 236.5 |
| 8 | 219.1 | 127.0 | 304.8 | 203.2 | 609.6 | 406.4 | 414.3 | 312.7 |
| 10 | 273.1 | 158.8 | 381.0 | 254.0 | 762.0 | 508.0 | 517.7 | 390.7 |
| 12 | 323.9 | 190.5 | 457.2 | 304.8 | 914.4 | 609.6 | 619.3 | 466.9 |
| 14 | 355.6 | 222.3 | 533.4 | 355.6 | 1066.8 | 711.2 | 711.2 | 533.4 |
| 16 | 405.4 | 254.0 | 609.6 | 406.4 | 1219.2 | 812.8 | 812.8 | 609.6 |
| 18 | 457.2 | 285.8 | 685.8 | 457.2 | 1317.6 | 914.4 | 914.4 | 685.8 |
| 20 | 508.0 | 317.5 | 762.0 | 508.0 | 1524.0 | 1016.0 | 1016.0 | 762.0 |
| 22 | 558.8 | 342.9 | 838.2 | 558.8 | 1676.4 | 1117.6 | 1117.6 | 838.2 |
| 24 | 609.6 | 381.0 | 914.4 | 609.6 | 1828.8 | 1219.2 | 1219.2 | 914.4 |
| 26 | 660.4 | 406.0 | 990.6 | Note: The long radius elbow in the table is taken from ASME B 16.9, and the short radius head is taken from ASME B 16.28. | ||||
| 28 | 711.2 | 438.2 | 1066.8 | |||||
| 30 | 762.0 | 469.9 | 1143.0 | |||||
| 32 | 812.8 | 501.7 | 1219.2 | |||||
| 34 | 863.6 | 533.4 | 1295.4 | |||||
| 36 | 914.4 | 565.2 | 1371.6 | |||||
| 38 | 965.2 | 599.9 | 1447.8 | |||||
| 40 | 1016.0 | 632.0 | 1524.0 | |||||
| 42 | 1066.8 | 660.4 | 1600.2 | |||||
| 44 | 1117.6 | 695.5 | 1676.4 | |||||
| 46 | 1168.4 | 726.9 | 1752.6 | |||||
| 48 | 1219.2 | 758.9 | 1828.8 | |||||
| Technical parameter table
| Factory Shoot
| Stainless Steel Pipe Tube Return U bend
The seamless welding technology ensures a smooth finish, enhancing the overall stability of the pipes. The large moment of inertia and cross-section modulus provide these bends with superior bending and torsion resistance, making them ideal for critical applications where structural integrity is paramount.
| Size
| ASME/ANSI B16.9、B16.28 | ||||||||
| Norminal Pipe Size | Outside Diameter at Bevel | Center to End | Center to Center | Back to Face | ||||
| 45°Elbows | 90° EIbows | 180° Reture | ||||||
| H | F | P | K | |||||
| Long Radius | Long Radius | Short Radius | Long Radius | Short Radius | Long Radius | Short Radius | ||
| 1/2 | 21.3 | 15.7 | 38.1 | -- | 76.2 | -- | 47.8 | -- |
| 3/4 | 26.7 | 19.1 | 38.1 | -- | 76.2 | -- | 50.8 | -- |
| 1 | 33.4 | 22.4 | 38.1 | 25.4 | 76.2 | 50.8 | 55.6 | 41.1 |
| 11/4 | 42.2 | 25.4 | 47.8 | 31.8 | 95.3 | 63.6 | 69.9 | 52.3 |
| 11/2 | 48.3 | 28.4 | 57.2 | 38.1 | 114.3 | 76.2 | 82.6 | 62.0 |
| 2 | 60.3 | 35.1 | 76.2 | 50.8 | 152.4 | 101.6 | 106.4 | 81.0 |
| 21/2 | 73.0 | 44.5 | 95.3 | 63.5 | 190.5 | 127.0 | 131.8 | 100.1 |
| 3 | 88.9 | 50.8 | 114.3 | 76.2 | 228.6 | 152.4 | 158.8 | 120.7 |
| 31/2 | 101.6 | 57.2 | 133.4 | 88.9 | 266.7 | 177.8 | 184.2 | 139.7 |
| 4 | 114.3 | 63.5 | 152.4 | 101.6 | 304.8 | 203.2 | 209.6 | 158.8 |
| 5 | 141.3 | 79.2 | 190.5 | 127.0 | 381.0 | 254.0 | 261.9 | 196.9 |
| 6 | 168.3 | 95.3 | 228.6 | 152.4 | 457.2 | 304.8 | 312.7 | 236.5 |
| 8 | 219.1 | 127.0 | 304.8 | 203.2 | 609.6 | 406.4 | 414.3 | 312.7 |
| 10 | 273.1 | 158.8 | 381.0 | 254.0 | 762.0 | 508.0 | 517.7 | 390.7 |
| 12 | 323.9 | 190.5 | 457.2 | 304.8 | 914.4 | 609.6 | 619.3 | 466.9 |
| 14 | 355.6 | 222.3 | 533.4 | 355.6 | 1066.8 | 711.2 | 711.2 | 533.4 |
| 16 | 405.4 | 254.0 | 609.6 | 406.4 | 1219.2 | 812.8 | 812.8 | 609.6 |
| 18 | 457.2 | 285.8 | 685.8 | 457.2 | 1317.6 | 914.4 | 914.4 | 685.8 |
| 20 | 508.0 | 317.5 | 762.0 | 508.0 | 1524.0 | 1016.0 | 1016.0 | 762.0 |
| 22 | 558.8 | 342.9 | 838.2 | 558.8 | 1676.4 | 1117.6 | 1117.6 | 838.2 |
| 24 | 609.6 | 381.0 | 914.4 | 609.6 | 1828.8 | 1219.2 | 1219.2 | 914.4 |
| 26 | 660.4 | 406.0 | 990.6 | Note: The long radius elbow in the table is taken from ASME B 16.9, and the short radius head is taken from ASME B 16.28. | ||||
| 28 | 711.2 | 438.2 | 1066.8 | |||||
| 30 | 762.0 | 469.9 | 1143.0 | |||||
| 32 | 812.8 | 501.7 | 1219.2 | |||||
| 34 | 863.6 | 533.4 | 1295.4 | |||||
| 36 | 914.4 | 565.2 | 1371.6 | |||||
| 38 | 965.2 | 599.9 | 1447.8 | |||||
| 40 | 1016.0 | 632.0 | 1524.0 | |||||
| 42 | 1066.8 | 660.4 | 1600.2 | |||||
| 44 | 1117.6 | 695.5 | 1676.4 | |||||
| 46 | 1168.4 | 726.9 | 1752.6 | |||||
| 48 | 1219.2 | 758.9 | 1828.8 | |||||
| Technical parameter table
| Factory Shoot
