 |
| Quantity: | |
|---|---|
| Advantages
• Stronger pressure resistance: Forged process makes stainless steel thread tees more firm and solid.
• Long-term Use: With excellent corrosive resistance, threaded straight tee pipe fittings can resist the erosion of corrosive media such as acid and alkali.
• Easy installation: Thread connection instead of using welding equipments
• Branch redirection: Ensure the balance and stability of pipeline systems
| Instructions
1. Preparation: Ensure that the required threaded straight tees and pipeline materials are prepared. Check their quality and size are qualified.
2. Pipeline cleaning: Clean the internal and external surfaces of pipeline, to ensure there are no dirt and impurities.
3. Package removal: It’s vital to check any damage or deformation.
4. Installation: Insert threaded equal tees into both ends of pipe and tighten the threads by hands. A wrench can be used for large size female thread tee fittings.
5. Non-leakage: Check for any leaks at the connections by pressure testing or other methods.
6. Fixing: Use brackets to strengthen tee fittings and pipes.
Note: The above steps are general instructions only and may vary depending on the application and piping requirements
| Size
Nominal Size | Center-to-End | Outside Diameter of Band | Wall Thickness | Length of Thread | |||||||||||
DN | NPS | A | H | G min | L 5min | L 2 min | |||||||||
| 90° Elbows, Tees, Crosses | 45° Elbows | ||||||||||||||
| 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | ||||
| 6 8 10 | 1/8 1/4 3/8 | 21 21 25 | 21 25 28 | 25 28 33 | 17 17 19 | 17 19 22 | 19 22 25 | 22 22 25 | 22 25 33 | 25 33 38 | 3.18 3.18 3.18 | 3.18 3.30 3.51 | 6.35 6.60 6.98 | 6.4 8.1 9.1 | 6.7 10.2 10.4 |
| 15 20 25 | 1/2 3/4 1 | 28 33 38 | 33 38 44 | 38 44 51 | 22 25 28 | 25 28 33 | 28 33 35 | 33 38 46 | 38 46 56 | 46 56 62 | 3.18 3.18 3.68 | 4.09 4.32 4.98 | 8.15 8.53 9.93 | 10.9 12.7 14.7 | 13.6 13.9 17.3 |
| 32 40 50 | 1-1/4 1-1/2 2 | 44 51 60 | 51 60 64 | 60 64 83 | 33 35 43 | 35 43 44 | 43 44 52 | 56 62 75 | 62 75 84 | 75 84 102 | 3.89 4.01 4.27 | 5.28 5.56 7.14 | 10.59 11.07 12.09 | 17.0 17.8 19.0 | 18.0 18.4 19.2 |
| 65 80 100 | 2-1/2 3 4 | 76 86 106 | 83 95 114 | 95 106 114 | 52 64 79 | 52 64 79 | 64 79 79 | 92 109 146 | 102 121 152 | 121 146 152 | 5.61 5.99 6.55 | 7.65 8.84 11.18 | 15.29 16.64 18.67 | 23.6 25.9 27.7 | 28.9 30.5 33.0 |
| Note: 1)Thread shall be machined per GB/T 12716 (equivalent to ASME B1.20.1). | |||||||||||||||
| Technical parameter table
| Item | Thread Equal Tee |
| Size | 1/8" - 4” / DN6 - DN100 |
| Thread Type | BSP, NPT, BSPT etc |
| Pressure Rating | 2000LBS, 3000LBS, 6000LBS |
| Standard | GB/T 14383, ASME B16.11, BS3799 etc |
| Material | Stainless steel: ASTM A182 F304/304L/304H, 316/316L, 310S, 317, 347, 904L etc |
| Carbon steel: ASTM A105, 20#, Q234, Q235 etc | |
| Alloy steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 etc | |
| Duplex steel: ASTM A182 F51, F53, F44 etc | |
| Other special: ASTM A350 LF2, 16Mn, ASTM A694 F42 / 46 / 56 / 60 / 65 |
| Factory Shoot
| Advantages
• Stronger pressure resistance: Forged process makes stainless steel thread tees more firm and solid.
• Long-term Use: With excellent corrosive resistance, threaded straight tee pipe fittings can resist the erosion of corrosive media such as acid and alkali.
• Easy installation: Thread connection instead of using welding equipments
• Branch redirection: Ensure the balance and stability of pipeline systems
| Instructions
1. Preparation: Ensure that the required threaded straight tees and pipeline materials are prepared. Check their quality and size are qualified.
2. Pipeline cleaning: Clean the internal and external surfaces of pipeline, to ensure there are no dirt and impurities.
3. Package removal: It’s vital to check any damage or deformation.
4. Installation: Insert threaded equal tees into both ends of pipe and tighten the threads by hands. A wrench can be used for large size female thread tee fittings.
5. Non-leakage: Check for any leaks at the connections by pressure testing or other methods.
6. Fixing: Use brackets to strengthen tee fittings and pipes.
Note: The above steps are general instructions only and may vary depending on the application and piping requirements
| Size
Nominal Size | Center-to-End | Outside Diameter of Band | Wall Thickness | Length of Thread | |||||||||||
DN | NPS | A | H | G min | L 5min | L 2 min | |||||||||
| 90° Elbows, Tees, Crosses | 45° Elbows | ||||||||||||||
| 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | ||||
| 6 8 10 | 1/8 1/4 3/8 | 21 21 25 | 21 25 28 | 25 28 33 | 17 17 19 | 17 19 22 | 19 22 25 | 22 22 25 | 22 25 33 | 25 33 38 | 3.18 3.18 3.18 | 3.18 3.30 3.51 | 6.35 6.60 6.98 | 6.4 8.1 9.1 | 6.7 10.2 10.4 |
| 15 20 25 | 1/2 3/4 1 | 28 33 38 | 33 38 44 | 38 44 51 | 22 25 28 | 25 28 33 | 28 33 35 | 33 38 46 | 38 46 56 | 46 56 62 | 3.18 3.18 3.68 | 4.09 4.32 4.98 | 8.15 8.53 9.93 | 10.9 12.7 14.7 | 13.6 13.9 17.3 |
| 32 40 50 | 1-1/4 1-1/2 2 | 44 51 60 | 51 60 64 | 60 64 83 | 33 35 43 | 35 43 44 | 43 44 52 | 56 62 75 | 62 75 84 | 75 84 102 | 3.89 4.01 4.27 | 5.28 5.56 7.14 | 10.59 11.07 12.09 | 17.0 17.8 19.0 | 18.0 18.4 19.2 |
| 65 80 100 | 2-1/2 3 4 | 76 86 106 | 83 95 114 | 95 106 114 | 52 64 79 | 52 64 79 | 64 79 79 | 92 109 146 | 102 121 152 | 121 146 152 | 5.61 5.99 6.55 | 7.65 8.84 11.18 | 15.29 16.64 18.67 | 23.6 25.9 27.7 | 28.9 30.5 33.0 |
| Note: 1)Thread shall be machined per GB/T 12716 (equivalent to ASME B1.20.1). | |||||||||||||||
| Technical parameter table
| Item | Thread Equal Tee |
| Size | 1/8" - 4” / DN6 - DN100 |
| Thread Type | BSP, NPT, BSPT etc |
| Pressure Rating | 2000LBS, 3000LBS, 6000LBS |
| Standard | GB/T 14383, ASME B16.11, BS3799 etc |
| Material | Stainless steel: ASTM A182 F304/304L/304H, 316/316L, 310S, 317, 347, 904L etc |
| Carbon steel: ASTM A105, 20#, Q234, Q235 etc | |
| Alloy steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 etc | |
| Duplex steel: ASTM A182 F51, F53, F44 etc | |
| Other special: ASTM A350 LF2, 16Mn, ASTM A694 F42 / 46 / 56 / 60 / 65 |
| Factory Shoot
