 |
| Quantity: | |
|---|---|
Good corrosion resistance
High pressure-bearing capacity 
Economical and practical
Easy to install
Note：
Dimension B is minimum length of perfect thread. The Length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2(effective length of external thread)required by American National Standard for pipe threads (ANSI/ASME B1.20.1).
| Nominal size | THRD Tee | |||
| DN | NPS | 2000 | 3000 | 6000 |
| 6 | 1/8 | 0.13 | 0.22 | 0.35 |
| 8 | 1/4 | 0.13 | 0.22 | 0.57 |
| 10 | 3/8 | 0.16 | 0.4 | 0.66 |
| 15 | 1/2 | 0.35 | 0.58 | 1.15 |
| 20 | 3/4 | 0.45 | 0.9 | 1.8 |
| 25 | 1 | 0.66 | 1.46 | 2.25 |
| 32 | 1¼ | 1 | 1.9 | 3.95 |
| 40 | 1½ | 1.4 | 3.4 | 4.87 |
| 50 | 2 | 2.2 | 3.8 | 8.89 |
| 65 | 2½ | 4.2 | 7.2 | 12.8 |
| 80 | 3 | 6.15 | 10.7 | 21.6 |
| 100 | 4 | 14.7 | 17.9 | 29.5 |
Unit: kg
Good corrosion resistance
High pressure-bearing capacity Economical and practical
Easy to install
Note：
Dimension B is minimum length of perfect thread. The Length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2(effective length of external thread)required by American National Standard for pipe threads (ANSI/ASME B1.20.1).
| Nominal size | THRD Tee | |||
| DN | NPS | 2000 | 3000 | 6000 |
| 6 | 1/8 | 0.13 | 0.22 | 0.35 |
| 8 | 1/4 | 0.13 | 0.22 | 0.57 |
| 10 | 3/8 | 0.16 | 0.4 | 0.66 |
| 15 | 1/2 | 0.35 | 0.58 | 1.15 |
| 20 | 3/4 | 0.45 | 0.9 | 1.8 |
| 25 | 1 | 0.66 | 1.46 | 2.25 |
| 32 | 1¼ | 1 | 1.9 | 3.95 |
| 40 | 1½ | 1.4 | 3.4 | 4.87 |
| 50 | 2 | 2.2 | 3.8 | 8.89 |
| 65 | 2½ | 4.2 | 7.2 | 12.8 |
| 80 | 3 | 6.15 | 10.7 | 21.6 |
| 100 | 4 | 14.7 | 17.9 | 29.5 |
Unit: kg
