 |
| Quantity: | |
|---|---|
| Carbon Steel Pipe Tube Return U bend
Carbon steel U bend pipe is widely used in various engineering projects due to its excellent ductility. Its ability to bend and round without damaging the internal structure of the pipe makes it a preferred choice for complex construction requirements. The design and manufacturing process of these pipes focus on controlling the bending radius and temperature to ensure optimal performance. This careful processing ensures that the pipes meet the highest standards and can withstand long-term use in challenging environments.
| Size
| ASME/ANSI B16.9、B 16.28 | ||||||||
| Normnal Pipe Size | Outside Diameter at Bevel | Center to End | Center to Center | Back to Face | ||||
| 45°Elbows | 90°EIbows | 180°Reture | ||||||
| H | F | P | K | |||||
| Long Radius | Long Radius | Short Radius | Long Radius | Short Radius | Long Radius | Short Radius | ||
| 1/2 | 21.3 | 15.7 | 38.1 | -- | 76.2 | -- | 47.8 | -- |
| 3/4 | 26.7 | 19.1 | 38.1 | -- | 76.2 | -- | 50.8 | -- |
| 1 | 33.4 | 22.4 | 38.1 | 25.4 | 76.2 | 50.8 | 55.6 | 41.1 |
| 11/4 | 42.2 | 25.4 | 47.8 | 31.8 | 95.3 | 63.6 | 69.9 | 52.3 |
| 11/2 | 48.3 | 28.4 | 57.2 | 38.1 | 114.3 | 76.2 | 82.6 | 62.0 |
| 2 | 60.3 | 35.1 | 76.2 | 50.8 | 152.4 | 101.6 | 106.4 | 81.0 |
| 21/2 | 73.0 | 44.5 | 95.3 | 63.5 | 190.5 | 127.0 | 131.8 | 100.1 |
| 3 | 88.9 | 50.8 | 114.3 | 76.2 | 228.6 | 152.4 | 158.8 | 120.7 |
| 31/2 | 101.6 | 57.2 | 133.4 | 88.9 | 266.7 | 177.8 | 184.2 | 139.7 |
| 4 | 114.3 | 63.5 | 152.4 | 101.6 | 304.8 | 203.2 | 209.6 | 158.8 |
| 5 | 141.3 | 79.2 | 190.5 | 127.0 | 381.0 | 254.0 | 261.9 | 196.9 |
| 6 | 168.3 | 95.3 | 228.6 | 152.4 | 457.2 | 304.8 | 312.7 | 236.5 |
| 8 | 219.1 | 127.0 | 304.8 | 203.2 | 609.6 | 406.4 | 414.3 | 312.7 |
| 10 | 273.1 | 158.8 | 381.0 | 254.0 | 762.0 | 508.0 | 517.7 | 390.7 |
| 12 | 323.9 | 190.5 | 457.2 | 304.8 | 914.4 | 609.6 | 619.3 | 466.9 |
| 14 | 355.6 | 222.3 | 533.4 | 355.6 | 1066.8 | 711.2 | 711.2 | 533.4 |
| 16 | 405.4 | 254.0 | 609.6 | 406.4 | 1219.2 | 812.8 | 812.8 | 609.6 |
| 18 | 457.2 | 285.8 | 685.8 | 457.2 | 1317.6 | 914.4 | 914.4 | 685.8 |
| 20 | 508.0 | 317.5 | 762.0 | 508.0 | 1524.0 | 1016.0 | 1016.0 | 762.0 |
| 22 | 558.8 | 342.9 | 838.2 | 558.8 | 1676.4 | 1117.6 | 1117.6 | 838.2 |
| 24 | 609.6 | 381.0 | 914.4 | 609.6 | 1828.8 | 1219.2 | 1219.2 | 914.4 |
| 26 | 660.4 | 406.0 | 990.6 | Note: The long radius elbow in the table is taken from ASME/ANSI B 16.9, and the short radius head is taken from ASME/ANSI B16.28. | ||||
| 28 | 711.2 | 438.2 | 1066.8 | |||||
| 30 | 762.0 | 469.9 | 1143.0 | |||||
| 32 | 812.8 | 501.7 | 1219.2 | |||||
| 34 | 863.6 | 533.4 | 1295.4 | |||||
| 36 | 914.4 | 565.2 | 1371.6 | |||||
| 38 | 965.2 | 599.9 | 1447.8 | |||||
| 40 | 1016.0 | 632.0 | 1524.0 | |||||
| 42 | 1066.8 | 660.4 | 1600.2 | |||||
| 44 | 1117.6 | 695.5 | 1676.4 | |||||
| 46 | 1168.4 | 726.9 | 1752.6 | |||||
| 48 | 1219.2 | 758.9 | 1828.8 | |||||
| Technical parameter table
| Product name | Elbow & Bend |
| Wall thickness | SCH5S, SCH10S, SCH20S, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, etc |
| Standard | ASME B16.9, ASME A403, GB/T12459-2005, DIN, GOST, JIS B2313 |
| Degree | 22.5°, 30°, 45°, 60°, 90°, 180°, Bend etc |
| Application | Chemical industry, oil, petroleum industry, construction industry, metallurgy, pharmaceutical, power industry, gas industry, domestic installation. |
| Material | Stainless steel: 201,TP304,TP316, TP304L, TP316L, 304L, 316L, TP321, TP310S, 904L, etc |
| Carbon steel: A105, Q234, Q235, X52, F70, Y60, Y70, etc | |
| Duplex steel: 2205(S31803), S32205, F60, 2507(S32750) , S32760, etc | |
| Alloy steel: Monel 400, Monel 600, Monel 800, C276, 254MO, Tai, Incoloy 800H, Incoloy600, NO 8020, NO 8800 | |
| Other special: C70600, 254MO, etc | |
| Surface | Pickled, sand blasting, sand rolling, matt polished, mirror polished, shinning |
| Carbon Steel Pipe Tube Return U bend
Carbon steel U bend pipe is widely used in various engineering projects due to its excellent ductility. Its ability to bend and round without damaging the internal structure of the pipe makes it a preferred choice for complex construction requirements. The design and manufacturing process of these pipes focus on controlling the bending radius and temperature to ensure optimal performance. This careful processing ensures that the pipes meet the highest standards and can withstand long-term use in challenging environments.
| Size
| ASME/ANSI B16.9、B 16.28 | ||||||||
| Normnal Pipe Size | Outside Diameter at Bevel | Center to End | Center to Center | Back to Face | ||||
| 45°Elbows | 90°EIbows | 180°Reture | ||||||
| H | F | P | K | |||||
| Long Radius | Long Radius | Short Radius | Long Radius | Short Radius | Long Radius | Short Radius | ||
| 1/2 | 21.3 | 15.7 | 38.1 | -- | 76.2 | -- | 47.8 | -- |
| 3/4 | 26.7 | 19.1 | 38.1 | -- | 76.2 | -- | 50.8 | -- |
| 1 | 33.4 | 22.4 | 38.1 | 25.4 | 76.2 | 50.8 | 55.6 | 41.1 |
| 11/4 | 42.2 | 25.4 | 47.8 | 31.8 | 95.3 | 63.6 | 69.9 | 52.3 |
| 11/2 | 48.3 | 28.4 | 57.2 | 38.1 | 114.3 | 76.2 | 82.6 | 62.0 |
| 2 | 60.3 | 35.1 | 76.2 | 50.8 | 152.4 | 101.6 | 106.4 | 81.0 |
| 21/2 | 73.0 | 44.5 | 95.3 | 63.5 | 190.5 | 127.0 | 131.8 | 100.1 |
| 3 | 88.9 | 50.8 | 114.3 | 76.2 | 228.6 | 152.4 | 158.8 | 120.7 |
| 31/2 | 101.6 | 57.2 | 133.4 | 88.9 | 266.7 | 177.8 | 184.2 | 139.7 |
| 4 | 114.3 | 63.5 | 152.4 | 101.6 | 304.8 | 203.2 | 209.6 | 158.8 |
| 5 | 141.3 | 79.2 | 190.5 | 127.0 | 381.0 | 254.0 | 261.9 | 196.9 |
| 6 | 168.3 | 95.3 | 228.6 | 152.4 | 457.2 | 304.8 | 312.7 | 236.5 |
| 8 | 219.1 | 127.0 | 304.8 | 203.2 | 609.6 | 406.4 | 414.3 | 312.7 |
| 10 | 273.1 | 158.8 | 381.0 | 254.0 | 762.0 | 508.0 | 517.7 | 390.7 |
| 12 | 323.9 | 190.5 | 457.2 | 304.8 | 914.4 | 609.6 | 619.3 | 466.9 |
| 14 | 355.6 | 222.3 | 533.4 | 355.6 | 1066.8 | 711.2 | 711.2 | 533.4 |
| 16 | 405.4 | 254.0 | 609.6 | 406.4 | 1219.2 | 812.8 | 812.8 | 609.6 |
| 18 | 457.2 | 285.8 | 685.8 | 457.2 | 1317.6 | 914.4 | 914.4 | 685.8 |
| 20 | 508.0 | 317.5 | 762.0 | 508.0 | 1524.0 | 1016.0 | 1016.0 | 762.0 |
| 22 | 558.8 | 342.9 | 838.2 | 558.8 | 1676.4 | 1117.6 | 1117.6 | 838.2 |
| 24 | 609.6 | 381.0 | 914.4 | 609.6 | 1828.8 | 1219.2 | 1219.2 | 914.4 |
| 26 | 660.4 | 406.0 | 990.6 | Note: The long radius elbow in the table is taken from ASME/ANSI B 16.9, and the short radius head is taken from ASME/ANSI B16.28. | ||||
| 28 | 711.2 | 438.2 | 1066.8 | |||||
| 30 | 762.0 | 469.9 | 1143.0 | |||||
| 32 | 812.8 | 501.7 | 1219.2 | |||||
| 34 | 863.6 | 533.4 | 1295.4 | |||||
| 36 | 914.4 | 565.2 | 1371.6 | |||||
| 38 | 965.2 | 599.9 | 1447.8 | |||||
| 40 | 1016.0 | 632.0 | 1524.0 | |||||
| 42 | 1066.8 | 660.4 | 1600.2 | |||||
| 44 | 1117.6 | 695.5 | 1676.4 | |||||
| 46 | 1168.4 | 726.9 | 1752.6 | |||||
| 48 | 1219.2 | 758.9 | 1828.8 | |||||
| Technical parameter table
| Product name | Elbow & Bend |
| Wall thickness | SCH5S, SCH10S, SCH20S, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, etc |
| Standard | ASME B16.9, ASME A403, GB/T12459-2005, DIN, GOST, JIS B2313 |
| Degree | 22.5°, 30°, 45°, 60°, 90°, 180°, Bend etc |
| Application | Chemical industry, oil, petroleum industry, construction industry, metallurgy, pharmaceutical, power industry, gas industry, domestic installation. |
| Material | Stainless steel: 201,TP304,TP316, TP304L, TP316L, 304L, 316L, TP321, TP310S, 904L, etc |
| Carbon steel: A105, Q234, Q235, X52, F70, Y60, Y70, etc | |
| Duplex steel: 2205(S31803), S32205, F60, 2507(S32750) , S32760, etc | |
| Alloy steel: Monel 400, Monel 600, Monel 800, C276, 254MO, Tai, Incoloy 800H, Incoloy600, NO 8020, NO 8800 | |
| Other special: C70600, 254MO, etc | |
| Surface | Pickled, sand blasting, sand rolling, matt polished, mirror polished, shinning |
